Jump to content


  2. → Viewing Profile: Posts: Nhpatriot

Nhpatriot

Member Since 26 Feb 2009
Offline Last Active Mar 01 2009 05:19 PM
-----

Posts I've Made

In Topic: Tucker electrical

01 March 2009 - 03:56 PM

I'm thinking they're just cheap switches and relays that aren't really holding up to the rated current.
The light switch is a Motocraft (FORD) and it only has 2 head ights and 4 parking / directionals on it.

Just thought I'd see if everyone has this issue with the Tuckers.

In Topic: Tucker electrical

28 February 2009 - 10:29 PM

Different circuits leaving the fuse panel.
Fused as from factory, long term heat buildup not a short.
No new loads.

I replaced the melted 20A relay for the High lights with 2 40 amp relays.

usually bad ground will be a resistance further limiting current lowering the current.

all issues are on power side not ground side so common ground isn't an issue.

In Topic: Random snowmobile pics

28 February 2009 - 09:18 PM

Multi club poker run 2-21-09 Moose Mountain Brookfield, NH.
[attachment=4004:Groomers...oker_run.JPG]

In Topic: Tucker electrical

28 February 2009 - 08:39 PM

BTW all items were melted, not a vibration issue.

In Topic: Tucker electrical

28 February 2009 - 08:36 PM

running about 14vdc while running, little high but I didn't think it was excessively high. Haven't checked with scope yet for how clean it is.

  1. SledNH.com
  2. → Viewing Profile: Posts: Nhpatriot
  3. Board Guidelines