Jump to content



sealing the exhaust...


3 replies to this topic

#1 Do the Doo

Do the Doo

    Advanced Member

  • Members
  • PipPipPip
  • 595 posts
  • Gender:Male
  • Location:Hartford County, Conn.
  • Interests:Anything Winter and power boating.
  • Favorite Riding Area:Pittsburg, NH & Rangeley, ME
  • Club(s):Pittsburg Ridge Runners

Posted 19 January 2009 - 02:17 PM

I have a 2001 MXZ 800 Adrenaline with stock exhaust and can. I have been resealing the exhaust with orange/red RV silicone gasket every other season. I am getting tired of pulling this thing off, cleaning it, resealing it and re installing it. Is there a better stronger seal? Do the springs loose their tensil strength to hold the pipe so the seals keep breaking or this is just normal? It gets a little loud when the seal is broken.

Last question, I riding in New Hampshire and Maine is there an after market exhaust and can that maintains the stock decibals but is much lighter in weight? I am not looking for exotic set up either, just weight savings.

Thanks
Ride Right, Ride Sober, I want to see my kids have kids!

#2 denny @ 45thParallelCabins

denny @ 45thParallelCabins

    Advanced Member

  • Advertisers
  • PipPipPip
  • 541 posts
  • Gender:Male
  • Favorite Riding Area:north

Posted 19 January 2009 - 03:11 PM

In 02 doo went to a doghnut set up instead of the silacone I believe the doghnut set fits the 01 as well.
Posted Image

#3 Do the Doo

Do the Doo

    Advanced Member

  • Members
  • PipPipPip
  • 595 posts
  • Gender:Male
  • Location:Hartford County, Conn.
  • Interests:Anything Winter and power boating.
  • Favorite Riding Area:Pittsburg, NH & Rangeley, ME
  • Club(s):Pittsburg Ridge Runners

Posted 19 January 2009 - 10:19 PM

View Postfxsts, on Jan 19 2009, 03:11 PM, said:

In 02 doo went to a doghnut set up instead of the silacone I believe the doghnut set fits the 01 as well.

Where did you get the doghnut? or did you fabricate it? Thanks
Ride Right, Ride Sober, I want to see my kids have kids!

#4 plowking

plowking

    Advanced Member

  • Advertisers
  • PipPipPip
  • 702 posts
  • Gender:Male
  • Location:Nottingham
  • Interests:snowmobies, atv's, tractors
  • Favorite Riding Area:Stark, OVSC
  • Club(s):Paris Road Sno-Stompers

Posted 20 January 2009 - 06:14 PM

Skidoo dealer should have the doughnut gasket, it should be made of asbestos or some material that won't burn up from high temps. The silicone sealer you should be using is Copper silicone,it is high temp. and used on car exhaust joints before being clamped together. Springs could be getting weak,I changed trhe exhaust springs on my atv for same reason. plowking



Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users